Introduction

Tools such as cordless drills have become an integral part of our lives today because there is so much that the basic tool has to offer. It has enabled many people to avoid incurring costs for calling repairers even for the most basic repair tasks that a cordless drill is capable of fixing. As much as every other individual seems to consider having the best cordless drill for various driving, hammering and drilling tasks, maximizing its effectiveness is the only way to ensure that you get the best out of the tool. Here are some of the identifiable aspects that any cordless drill user should have in mind and you can know more about them if you visit website;

  • Forward/ reverse control: This is usually a sliding switch that shows and changes the direction that the power drill is driving towards, which mostly depends on the way it is pressed. To help indicate the direction, there should be corresponding arrows on both sides of the sliding switch.
  • Speed testing: Most cordless drills usually have two or three speeds, low speed/ high torque is the best for driving screws whereas the medium speed/ torque is used for drilling or driving and finally the highest speed of them all is ideal for drilling fasteners. Only adjust the speed when the tool is at a complete stop.
  • Clutch adjustment: This type of setting has a numbered dial that is used to set the clutch into delivering a torque range. A higher number therefore translates to a higher torque and the larger the fastener that can be driven. You can adjust the clutch to find a spot that drives the screw to the desired length.
  • Charge indicator: For many cordless drills out there in the market, an indicator light showing how much percentage of battery power is left is a necessity. If a battery happens to die, the indicators simply stop working with no notice at all.
  • LED-Lighting for easy drilling: Most modern and best cordless drill is equipped with led-lighting system that provides ease of sight especially when it comes to drilling in dark places and rooms. This is quite an enhanced flexibility and well thought feature. The only explanation being that most of the drilling tasks are carried out indoors, most of the time in houses which are under construction and are not yet installed with electricity lights which could have been used for lighting in the first place.
  • Installed with high torque gears: Torque is explained as the twisting power of a device of with less applied force or effort. Gears are usually responsible for turning the motor of the drill and for them to work more effectively, they should be robust and with a high torque. The heightened torque is what makes the devices an alternative for drilling and construction in that order.

Do’s and Don’ts of rechargeable batteries

The Do’s

  • Always keep the battery charged: Regardless of whether you are about to use them or not, have your batteries charged if you notice a decrease in power. Most batteries tend to last the longest when recharged at 70% capacity.
  • Use your batteries regularly: Regular use of batteries prolongs their life, so they should be used more often to ensure they do not reduce in terms of lifespan. Consider a plug-in version if you happen to use your cordless drill rarely or you can recharge the batteries first every other time that you start a project.
  • Charge your batteries until they are completely full in terms of charge: Leave the cordless tool battery plugged into power and do not remove until it is completely and fully charged.
  • Keep your batteries cool and dry: Most tools batteries tend to last longer if they are stored in dry areas. Cordless drill batteries should too be stored in dry places in order to prolong their life span.
  • Always consider having a backup battery: This is because relying on one battery will have you prolong the duration of work especially if the lone battery cannot run till the end of your tasks, because you will be required to stop and wait for it to get charge. On the other hand, a spare battery would save you from such agony.
  • Store your battery properly: Always make sure that your battery is always stored in its original case or a cushioned bag and also make sure that you use the plastic cap that came with it in order to prevent it from short circuiting. It also prevents the terminals from breakage due to moisture exposure.
  • Adjust cordless tool settings: Use the right tool setting for the job all the time. You are guaranteed to have more battery life if you happen to use the setting that is required for example in regard to higher torque settings running down a cordless drill faster.

The Don’ts

  • Do not drain your battery all the way down: It is not advisable to let a rechargeable battery run all the way down so you can recharge it because it ends up damaging the terminals and eventually shortening the battery life. For a cordless drill battery, you are supposed to recharge it the moment your tools start to slow down. Only deep drain when a certain type of battery shows decreased capacity due to memory effect.
  • Do not leave your battery on charger: Because not all chargers shut off automatically when a battery is fully charged. Leaving a battery on charging can lead to overcharging which usually results to damage of the battery. Only leave a battery charging if the tool instructions specifically dictate so.
  • Do not wet the battery: Exposing a cordless drill battery to water shortens its life because of damaged poles. Immediately wipe off any wetness on the tool or battery for that matter.
  • Do not overheat the battery: Overheating any tools batteries for that matter can cause them to explode. In case a battery gets too hot while charging, cool it down before recharging or considering using it. They shouldn’t be stored under hot conditions either.